Re: [PATCH v2 1/4] ARM: dts: sun8i: r40: add /omit-if-no-ref/ to pinmux nodes for UARTs 0&3
From: Andre Przywara <andre.przywara@arm.com>
Date: 2021-03-22 16:18:48
Also in:
linux-devicetree
On Mon, 22 Mar 2021 13:55:35 +0300 Ivan Uvarov [off-list ref] wrote: Hi,
This patch adds the /omit-if-no-ref/ keyword to the pio nodes for UART0 and UART3 pins of the R40 SoC, which would reduce the fdt size on boards which do not use these UARTs.
But what boards are those? It seems like all boards use uart3-pg and the two existing boards use UART0. I think the idea is to use omit-if-no-ref on some rarely used nodes, so if there is only a single user, for instance. Your next patch is a good example. So I don't think this patch here is needed at all. Cheers, Andre
quoted hunk ↗ jump to hunk
Signed-off-by: Ivan Uvarov <redacted> 1 file changed, 3 insertions(+)diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index d5ad3b9efd..0b257a0779 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi@@ -631,16 +631,19 @@ spi1_cs1_pi_pin: spi1-cs1-pi-pin { function = "spi1"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { pins = "PG8", "PG9"; function = "uart3";
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel