[PATCH v2 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral
From: Stefan Riedmueller <hidden>
Date: 2021-03-29 13:02:12
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Due to a hardware bug preventing the correct detection if the ID pin the USB OTG port cannot be used in otg mode. It can either be set to host or peripheral. Set it to peripheral so vbus is disabled by default. Signed-off-by: Stefan Riedmueller <redacted> Reviewed-by: Fabio Estevam <festevam@gmail.com> --- Changes in v2: - Added reviewed-by arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index d434868e870a..b2f78b4362cb 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi@@ -164,6 +164,7 @@ &usbh1 { &usbotg { status = "okay"; + dr_mode = "peripheral"; }; &usdhc2 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel