Re: [PATCH v2 net-next 0/5] net: stmmac: enable multi-vector MSI
From: patchwork-bot+netdevbpf@kernel.org
Date: 2021-03-26 21:50:44
Also in:
lkml, netdev
Hello: This series was applied to netdev/net-next.git (refs/heads/master): On Fri, 26 Mar 2021 01:39:11 +0800 you wrote:
This patchset adds support for multi MSI interrupts in addition to current single common interrupt implementation. Each MSI interrupt is tied to a newly introduce interrupt service routine(ISR). Hence, each interrupt will only go through the corresponding ISR. In order to increase the efficiency, enabling multi MSI interrupt will automatically select the interrupt mode configuration INTM=1. When INTM=1, the TX/RX transfer complete signal will only asserted on corresponding sbd_perch_tx_intr_o[] or sbd_perch_rx_intr_o[] without asserting signal on the common sbd_intr_o. Hence, for each TX/RX interrupts, only the corresponding ISR will be triggered. [...]
Here is the summary with links:
- [v2,net-next,1/5] net: stmmac: introduce DMA interrupt status masking per traffic direction
https://git.kernel.org/netdev/net-next/c/7e1c520c0d20
- [v2,net-next,2/5] net: stmmac: make stmmac_interrupt() function more friendly to MSI
https://git.kernel.org/netdev/net-next/c/29e6573c61aa
- [v2,net-next,3/5] net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX
https://git.kernel.org/netdev/net-next/c/8532f613bc78
- [v2,net-next,4/5] stmmac: intel: add support for multi-vector msi and msi-x
https://git.kernel.org/netdev/net-next/c/b42446b9b37b
- [v2,net-next,5/5] net: stmmac: use interrupt mode INTM=1 for multi-MSI
https://git.kernel.org/netdev/net-next/c/6ccf12ae111e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel