[PATCH v3 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
From: Jim Quinlan <jim2101024@gmail.com>
Date: 2021-03-26 19:19:54
Also in:
linux-devicetree, linux-pci, lkml
Subsystem:
broadcom bcm2711/bcm2835 arm architecture, broadcom bcm7xxx arm architecture, broadcom stb pcie driver, open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Florian Fainelli, Jim Quinlan, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Similar to the regulator bindings found in "rockchip-pcie-host.txt", this allows optional regulators to be attached and controlled by the PCIe RC driver. That being said, this driver searches in the DT subnode (the EP node, eg pci@0,0) for the regulator property. The use of a regulator property in the pcie EP subnode such as "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml file at https://github.com/devicetree-org/dt-schema/pull/54 Signed-off-by: Jim Quinlan <jim2101024@gmail.com> --- Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index f90557f6deb8..ea3e6f55e365 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml@@ -156,5 +156,11 @@ examples: <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; brcm,enable-ssc; brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; + + pcie-ep@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci14e4,1688"; + vpcie12v-supply: <&vreg12>; + }; }; };
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel