Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Date: 2021-03-23 18:44:37
Also in:
linux-alpha, linux-doc, linux-ide, linux-m68k, linux-mips, linuxppc-dev, lkml
On Mon, Mar 22, 2021 at 06:10:01PM +0100, Cye Borg wrote:
PWS 500au: snow / # lspci -vvx -s 7.1 00:07.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=mediumquoted
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 4: I/O ports at 9080 [size=16] Kernel driver in use: pata_cypress Kernel modules: pata_cypress 00: 80 10 93 c6 45 00 80 02 00 80 01 01 00 00 80 00 10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00 20: 81 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 snow / # lspci -vvx -s 7.2 00:07.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [ISA Compatibility mode-only controller]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=mediumquoted
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin B routed to IRQ 0 Region 0: I/O ports at 0170 [size=8] Region 1: I/O ports at 0374 Region 4: Memory at 0c240000 (32-bit, non-prefetchable) [disabled] [size=64K] Kernel modules: pata_cypress 00: 80 10 93 c6 45 00 80 02 00 00 01 01 00 00 80 00 10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00 20: 00 00 24 0c 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
Thanks very much. Could I also ask for the output of: # lspci -vxxx -s 7.0 as well please - this will dump all 256 bytes for the ISA bridge, which contains a bunch of configuration registers. Thanks. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel