[PATCH] PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
From: Kishon Vijay Abraham I <hidden>
Date: 2021-03-17 13:16:16
Also in:
linux-pci, lkml, stable
Subsystem:
pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Both TI's AM65x (K3) and TI's K2 PCIe driver are implemented in
pci-keystone. However Only K2 PCIe driver should use it's own pci_ops
for configuration space accesses. But commit 10a797c6e54a
("PCI: dwc: keystone: Use pci_ops for config space accessors") used
custom pci_ops for both AM65x and K2. This breaks configuration space
access for AM65x platform. Fix it here.
Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors")
Signed-off-by: Kishon Vijay Abraham I <redacted>
Cc: <redacted> # v5.10
---
drivers/pci/controller/dwc/pci-keystone.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 53aa35cb3a49..a59ecbec601f 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c@@ -798,7 +798,8 @@ static int __init ks_pcie_host_init(struct pcie_port *pp) int ret; pp->bridge->ops = &ks_pcie_ops; - pp->bridge->child_ops = &ks_child_pcie_ops; + if (!ks_pcie->is_am6) + pp->bridge->child_ops = &ks_child_pcie_ops; ret = ks_pcie_config_legacy_irq(ks_pcie); if (ret)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel