Re: [PATCH 1/8] ARM: ARMv7-M: Fix register restore corrupt after svc call

On Wed, Mar 3, 2021 at 10:19 PM Vladimir Murzin [off-list ref] wrote:

On 3/3/21 1:35 PM, dillon min wrote:

quoted

Hi Vladimir,

Thanks for the review.

On Wed, Mar 3, 2021 at 5:52 PM Vladimir Murzin [off-list ref] wrote:

quoted

On 3/3/21 8:05 AM, dillon.minfei@gmail.com wrote:

quoted

From: dillon min <redacted>

For some case, kernel not boot by u-boot(single thread),
but by rtos , as most rtos use pendsv to do context switch.

Hmm, does it mean that it starts kernel from process context?

   Yes, kernel might be started from process context, since u-boot not
switch context, so kernel always startup under msp.

quoted

I'd assume that it is not only kernel who expects MSP. So, what
if RTOS you mentioned want to boot other RTOS (even itself)? What
if you have no access to the source code for those RTOS(es) to
patch MSP/PSP switch?

My case is a little complicated.
stm32h7 only have 128Kbytes internal flash, can't store u-boot.bin (>200K),
so, set a bootloader (rt-thread rtos) to internal flash, load
linux/u-boot from serial port via ymodem
store to qspi flash(8Mbytes), then jump to u-boot.

qspi flash layout:
0 - 512K:    u-boot
512K- 8M : kernel(xip)

load process : rt-thread -> u-boot -> linux

before add psp/msp check after svc call, register restore corrupt.
add a printhex8 around svc call, found the sp stack is 0x24040000c0ffcff8
it should be 0xc0ffcdf8c0ffcff8. 0x24040000 is the sp stack address
assigned by u-boot
i've no idea how it's become to u-boot's sp.

I have the rtos code, and will try to fix it on the rtos side.

That would be great!

quoted

Can you give more explanation about why linux relies on MSP ? thanks

MSP is what set from boot, thus it is natural assumption that boot code
would preserve that illusion.

I'd guess that kernel is in line in such assumption across different
(RT)OS capable to run on M-class cores (please, note that some variants
might not have two stack pointers)

Okay， got it. after adding msp/psp switch code in RTOS, now the kernel
can be loaded normally
without any modification.

So, just drop the changes in proc-v7m.S.

Thanks.

Cheers
Vladimir

quoted

quoted

I'd very much prefer to keep stack switching logic outside kernel,
say, in some shim which RTOS/bootloader can maintain.

Cheers
Vladimir

quoted

So, we need add an lr check after svc call, to find out should
use psp or msp. else register restore after svc call might be
corrupted.

Fixes: b70cd406d7fe ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode")
Signed-off-by: dillon min <redacted>
---
 arch/arm/mm/proc-v7m.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 84459c1d31b8..c93d2757312d 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S

@@ -137,7 +137,10 @@ __v7m_setup_cont:
 1:   cpsid   i
      /* Calculate exc_ret */
      orr     r10, lr, #EXC_RET_THREADMODE_PROCESSSTACK
-     ldmia   sp, {r0-r3, r12}
+     tst     lr, #EXC_RET_STACK_MASK
+     mrsne   r4, psp
+     moveq   r4, sp
+     ldmia   r4!, {r0-r3, r12}
      str     r5, [r12, #11 * 4]      @ restore the original SVC vector entry
      mov     lr, r6                  @ restore LR

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel