Re: [PATCH v4 3/5] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2021-02-27 15:21:24
Also in:
linux-devicetree, lkml
On Fri, Feb 26, 2021 at 12:54:02AM +0530, Jagan Teki wrote:
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Add support for it. Signed-off-by: Matteo Lisi <redacted> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> ---
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ no-1-8-v;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ status = "okay";
+};
--
2.25.1_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel