Re: [PATCH v2 2/2] arm64: dts: fsl: add support for Kontron pitx-imx8m board

On Mon, Feb 22, 2021 at 03:07:56PM +0100, Heiko Thiery wrote:

The Kontron pitx-imx8m board is based on an i.MX8MQ soc.

Signed-off-by: Heiko Thiery <redacted>
---
v2:
 - bring root nodes in alphabetical order
 - remove pinctrl_gpio_keys for pciewake
 - remove pinctrl_sai2 and pinctrl_spdfif1 since it is not used yet

 Thanks to Michael Walle:
 - add pinctrl for regulator-v-3v3-sd
 - add name for regulator swbst
 - add comment about currently unused audio codec
 - put usb_phy entry in correct alphabetical order

 Thanks to Krzysztof Kozlowski:
 - use generic names for pcie-refclk, tpm, fan-controller, sensor
 - remove empty line
 - fix group name to match schema (ecspi2cs -> ecspi2csgrp)


 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../freescale/imx8mq-kontron-pitx-imx8m.dts   | 641 ++++++++++++++++++
 2 files changed, 642 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

Looks fine to me, also with the changes pointed out by Micahel in other
email in this thread:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel