[PATCH v3 3/9] arm64: dts: imx8mm-nitrogen-r2: add espi2 support
From: Adrien Grassein <hidden>
Date: 2021-02-19 14:34:54
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Add the description for espi support. Signed-off-by: Adrien Grassein <redacted> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 48b3bf4316b8..af740170569c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts@@ -45,6 +45,19 @@ &A53_3 { cpu-supply = <®_buck3>; }; +/* J15 */ +&ecspi2 { + assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>;
@@ -277,6 +290,15 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel