Re: [PATCH 2/4] net: stmmac: Add Toshiba Visconti SoCs glue driver
From: Leon Romanovsky <leon@kernel.org>
Date: 2021-02-15 06:08:23
Also in:
linux-devicetree, lkml, netdev
On Mon, Feb 15, 2021 at 02:06:53PM +0900, Nobuhiro Iwamatsu wrote:
quoted hunk ↗ jump to hunk
Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs. This patch contains only the basic function of the device. There is no clock control, PM, etc. yet. These will be added in the future. Signed-off-by: Nobuhiro Iwamatsu <redacted> --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 8 + drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + .../ethernet/stmicro/stmmac/dwmac-visconti.c | 285 ++++++++++++++++++ 3 files changed, 294 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.cdiff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 53f14c5a9e02..55ba67a550b9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig@@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT This selects the Intel platform specific glue layer support for the stmmac device driver. This driver is used for the Intel Keem Bay SoC. + +config DWMAC_VISCONTI + bool "Toshiba Visconti DWMAC support" + def_bool y
I asked it before, but never received an answer. Why did you use "def_bool y" and not "default y"? Isn't it supposed to be "depends on STMMAC_ETH"? And probably it shouldn't be set as a default as "y". Thanks _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel