[PATCH 4/6] arm64: dts: rockchip: add #phy-cells to mipi-dsi1
From: Heiko Stuebner <heiko@sntech.de>
Date: 2021-02-10 11:16:24
Also in:
dri-devel, linux-devicetree, linux-media, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Heiko Stuebner <redacted> The dsi controller includes access to the dphy which might be used not only for dsi output but also for csi input on dsi1, so add the necessary #phy-cells to allow it to be used as phy. Signed-off-by: Heiko Stuebner <redacted> Tested-by: Sebastian Fricke <redacted> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index edbbf35fe19e..5d2178cb3e38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi@@ -1865,6 +1865,7 @@ mipi_dsi1: mipi@ff968000 { rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; + #phy-cells = <0>; status = "disabled"; ports {
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel