Thread (31 messages) 31 messages, 4 authors, 2021-02-16

Re: [net-next PATCH v5 01/15] Documentation: ACPI: DSD: Document MDIO PHY

From: Calvin Johnson <hidden>
Date: 2021-02-09 14:37:15
Also in: linux-acpi, lkml, netdev

On Mon, Feb 08, 2021 at 12:01:57PM -0800, Randy Dunlap wrote:
Hi,
Just a couple of nits below:

On 2/8/21 7:12 AM, Calvin Johnson wrote:
quoted
Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.

Describe properties "phy-handle" and "phy-mode".

Signed-off-by: Calvin Johnson <redacted>
---
quoted
 Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..e1e99cae5eb2
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to MAC, the PHYs registered on the
                                    to a MAC,
Each PHY is connected to a MAC. So I'll change it to "PHYs to their respective MACs".
quoted
+MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
...
quoted
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver need
                                                                    needs
quoted
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).

thanks.
-- 
~Randy
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help