[RFC/PATCH v2 02/16] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
From: Nicolas Saenz Julienne <hidden>
Date: 2021-02-09 13:01:41
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Anticipating the introduction of BCM2711, of which we'll need to support its new Argon ASB, introduce reg-names into bcm2835-pm's binding. This will help to have a consistent mapping between resources and their meaning. Signed-off-by: Nicolas Saenz Julienne <redacted> --- .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index 8bc65e5f62a7..1dbe3657c690 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml@@ -26,8 +26,13 @@ properties: reg: minItems: 1 maxItems: 2 - description: Specifies base physical address and size of the two register - ranges, "PM" and "ASYNC_BRIDGE" in that order. + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: pm + - const: rpivid_asb "#power-domain-cells": const: 1
@@ -54,6 +59,7 @@ properties: required: - compatible - reg + - reg-names - "#power-domain-cells" - "#reset-cells" - clocks
@@ -70,6 +76,7 @@ examples: #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>; + reg-names = "pm", "rpivid_asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>,
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel