Re: [PATCH net-next RESEND 3/5] net: stmmac: dwmac-sun8i: Use reset_control_reset
From: Alexander Duyck <hidden>
Date: 2021-02-08 18:37:56
Also in:
lkml, netdev
On Sun, Feb 7, 2021 at 10:32 PM Samuel Holland [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Use the appropriate function instead of reimplementing it, and update the error message to match the code. Reviewed-by: Chen-Yu Tsai <redacted> Signed-off-by: Samuel Holland <samuel@sholland.org> --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 3c3d0b99d3e8..0e8d88417251 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c@@ -806,11 +806,9 @@ static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) /* Make sure the EPHY is properly reseted, as U-Boot may leave * it at deasserted state, and thus it may fail to reset EMAC. */ - reset_control_assert(gmac->rst_ephy); - - ret = reset_control_deassert(gmac->rst_ephy); + ret = reset_control_reset(gmac->rst_ephy); if (ret) { - dev_err(priv->device, "Cannot deassert internal phy\n"); + dev_err(priv->device, "Cannot reset internal PHY\n"); clk_disable_unprepare(gmac->ephy_clk); return ret; }
I'm assuming you have exclusive access to the phy and this isn't a shared line? Just wanting to confirm since the function call has the following comment in the header for the documentation. * Consumers must not use reset_control_(de)assert on shared reset lines when * reset_control_reset has been used. * If that is the case it might not hurt to add some documentation to your call to reset_control_reset here explaining that it is safe to do so since you have exclusive access. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel