[PATCH 5.10 024/120] ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02

From: Marek Vasut <marex@denx.de>

[ Upstream commit 83d411224025ac1baab981e3d2f5d29e7761541d ]

The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
correctness of the DT.

Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <redacted>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <redacted>
Cc: Patrick Delaunay <redacted>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 4cabdade6432b..e4d287d994214 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi

@@ -35,7 +35,7 @@
 	 */
 	rs485-rx-en {
 		gpio-hog;
-		gpios = <8 GPIO_ACTIVE_HIGH>;
+		gpios = <8 0>;
 		output-low;
 		line-name = "rs485-rx-en";
 	};

@@ -63,7 +63,7 @@
 	 */
 	usb-hub {
 		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
+		gpios = <2 0>;
 		output-high;
 		line-name = "usb-hub-reset";
 	};

-- 
2.27.0




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel