[PATCH v3 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells property
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
Date: 2021-02-08 12:08:19
Also in:
linux-devicetree, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
usbphyc provides a unique clock called ck_usbo_48m. STM32 USB OTG needs a 48Mhz clock (utmifs_clk48) for Full-Speed operation. ck_usbo_48m is a possible parent clock for USB OTG 48Mhz clock. ck_usbo_48m is available as soon as the PLL is enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- Changes in v3: - remove #clock-cells from required properties --- Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 46df6786727a..018cc1246ee1 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml@@ -51,6 +51,10 @@ properties: vdda1v8-supply: description: regulator providing 1V8 power supply to the PLL block + '#clock-cells': + description: number of clock cells for ck_usbo_48m consumer + const: 0 + #Required child nodes: patternProperties:
@@ -120,6 +124,7 @@ examples: vdda1v8-supply = <®18>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; usbphyc_port0: usb-phy@0 { reg = <0>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel