Re: [PATCH mvebu v2 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz

W dniu 14.01.2021 o 13:40, Pali Rohár pisze:

Hello!

The armada-37xx-cpufreq driver changes base CPU speed from 1000 MHz to
800 MHz on EspressoBIN and Turris MOX. The commit message in patch 2/10
explains why and how can this be discovered.

That patch 2/10 led us to discover another bug, in the SOC itself,
that causes the CPU to behave weirdly when frequency changes to 1 GHz.
A similar erratum is documented by Marvell but only for systems where
base frequency is 1.2 GHz.

We've discovered that to make cpufreq scaling stable on Armada 3720
systems with base frequency 1 GHz, we also have to set voltage levels
for L0 and L1 loads to at least 1108 mV. We were led to this by patch we
found in Marvell kernel fork. Fix is in the patch 4/10.

https://github.com/MarvellEmbeddedProcessors/linux-marvell/commit/dc33b62c90696afb6adc7dbcc4ebbd48bedec269

During fixing this voltage issue for 1 GHz we discovered another bug in
armada-37xx-cpufreq driver that causes CPU instability. Erratum for VDD
stabilization was improperly implemented, details are in patch 6/10.

This patch series is also available in my git tree in branch a3720-cpufreq-issues:

https://git.kernel.org/pub/scm/linux/kernel/git/pali/linux.git/log/?h=a3720-cpufreq-issues

We have tested this patch series on Espressobin v5 and Turris MOX
boards. If you have other Armada 3720 boards (Espressobin v5/v7, uDPU,
Devel Board, ...) then it will be nice to do an additional tests and
check if instability issues are finally fixed.

There is a discussion on armbian forum that Espressobin v7 is unstable
when running at 1 GHz and in this thread was also mentioned above
voltage patch from Marvell kernel fork:

https://forum.armbian.com/topic/10429-how-to-make-espressobin-v7-stable/

Marek & Pali


Marek Behún (3):
  arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM
    clock

Pali Rohár (7):
  cpufreq: armada-37xx: Fix the AVS value for loads L0 and L1
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to
    1 GHz
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1
    to L0
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix module unloading

Hi.
After running this series for three days, the system is stable and the 
issue with switching frequency doesn't seem to be there anymore. So:

Tested-by: Tomasz Maciej Nowak <redacted>

Thanks.

 arch/arm64/boot/dts/marvell/armada-37xx.dtsi |   3 +-
 drivers/clk/mvebu/armada-37xx-periph.c       |  83 ++++++++-------
 drivers/cpufreq/armada-37xx-cpufreq.c        | 100 ++++++++++++++-----
 3 files changed, 124 insertions(+), 62 deletions(-)

-- 
TMN

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel