If rockchip_pwm_probe() fails to register a PWM device it calls
clk_unprepare() for the device's PWM clock, without having first disabled
the clock and before jumping to an error handler that also unprepares
it. This is likely to produce warnings from the kernel about the clock
being unprepared when it is still enabled, and then being unprepared when
it has already been unprepared.

Prevent these warnings by removing this unnecessary call to
clk_unprepare().

Fixes: 48cf973cae33 ("pwm: rockchip: Avoid glitches on already running PWMs")
Signed-off-by: Simon South <redacted>
---
 drivers/pwm/pwm-rockchip.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index e6929bc73968..90f969f9f5e2 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c

@@ -351,7 +351,6 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
-		clk_unprepare(pc->clk);
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 		goto err_pclk;
 	}

-- 
2.30.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel