Re: BUG about Hisilicon PMU

On Mon, Jan 11, 2021 at 5:34 PM Shaokun Zhang
[off-list ref] wrote:

Hi John/Zhengyuan,

在 2021/1/11 17:13, John Garry 写道:

quoted

On 11/01/2021 08:25, Zhengyuan Liu wrote:

quoted

Hi, all

When boot v5.11-rc2 on my Kunpeng 920 PC, the kernel will block at PMU
initialization stage, and after binary-search with bisect I found that
this problem was introduced by commit ac4511c9364c ("drivers/perf:
hisi: Add identifier sysfs file"),
and to be more accurate it actually blocked at following position:

     hisi_hha_pmu_init_data():
          hha_pmu->identifier = readl(hha_pmu->base + HHA_VERSION);

If you guys had already know this problem, please ignore this message.

Do you have a dmesg? I don't see anything to block here, only crash.
Does v5.11-rc1 boot ok?

V5.11-rc1 has included this patch, therefore also bad.

The dmesg does not have any error message, It only blocked which seems
the cpu doesn't work,
and I can hear the rotation rate of fans increasing rapidly.

I also built the PMU from Y to M, it has the same phenomenon when the
module is loaded.

quoted

It works fine on my D06CS (which includes Kunpeng 920) with rc3:

john@debian:~$ more /sys/bus/event_source/devices/hisi_sccl5_hha7/identifier
0x00000000
john@debian:~$ uname -a
Linux debian 5.11.0-rc3-dirty #139 SMP PREEMPT Mon Jan 11 08:42:26 GMT 2021 aarch64 GNU/Linux
john@debian:~$

@Shaokun, Do you know what could be the problem on PC?

I doubt the UEFI which maybe give more HHA numbers than PC has or give the wrong
mmap address space that may cause this issue.
So please can you tell more information about the UEFI?

Did you mean DSDT or Bios Information?

Shaokun,

quoted

Thanks,
John
.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel