[PATCH v3 2/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
From: Dave Gerlach <hidden>
Date: 2021-01-20 20:29:57
Also in:
linux-devicetree
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Add pinctrl macros for AM64 SoC. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the soc dts files. Unlike what checkpatch insists, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Dave Gerlach <redacted> --- include/dt-bindings/pinctrl/k3.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
index b0eea7cc6e23..e085f102b283 100644
--- a/include/dt-bindings/pinctrl/k3.h
+++ b/include/dt-bindings/pinctrl/k3.h@@ -3,7 +3,7 @@ * This header provides constants for pinctrl bindings for TI's K3 SoC * family. * - * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef _DT_BINDINGS_PINCTRL_TI_K3_H #define _DT_BINDINGS_PINCTRL_TI_K3_H
@@ -35,4 +35,7 @@ #define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM64X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM64X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #endif
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel