[PATCH v5 3/4] arm64: dts: armada: add pwm offsets for ap/cp gpios
From: Baruch Siach <baruch@tkos.co.il>
Date: 2021-01-05 12:43:44
Also in:
linux-devicetree, linux-gpio, linux-pwm
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
The 'marvell,pwm-offset' property of both GPIO blocks (per CP component) point to the same counter registers offset. The driver will decide how to use counters A/B. This is different from the convention of pwm on earlier Armada series (370/38x). On those systems the assignment of A/B counters to GPIO blocks is coded in both DT and the driver. The actual behaviour of the current driver on Armada 8K/7K is the same as earlier systems. Add also clock properties for base pwm frequency reference. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 3 +++ arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++ 2 files changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 12e477f1aeb9..6614472100c2 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi@@ -281,6 +281,9 @@ ap_gpio: gpio@1040 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 20>; + marvell,pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; };
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 994a2fce449a..d774a39334d9 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi@@ -234,12 +234,17 @@ CP11X_LABEL(gpio1): gpio@100 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; };
@@ -250,12 +255,17 @@ CP11X_LABEL(gpio2): gpio@140 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; };
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel