Thread (3 messages) flat view 3 messages, 2 authors, 2021-01-28

Re: [PATCH] arm64: dts: imx8mq-nitrogen: add USB support

From: Gary Bisson <hidden>
Date: 2021-01-28 13:31:35
Also in: linux-devicetree, lkml

Hi Adrien,

Thanks for improving Nitrogen upstream, much appreciated.

On Tue, Jan 26, 2021 at 10:55:11PM +0100, Adrien Grassein wrote:
quoted hunk ↗ jump to hunk
add USB support for imx8mq-nitrogen. It consists
in 2 phys: OTG and host.

The OTG port uses a dedicated regulator for vbus.

Signed-off-by: Adrien Grassein <redacted>
---
 .../boot/dts/freescale/imx8mq-nitrogen.dts    | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 81d269296610..fb8acd83a280 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -34,6 +34,17 @@ power {
 		};
 	};
 
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_vref_0v9: regulator-vref-0v9 {
 		compatible = "regulator-fixed";
 		regulator-name = "vref-0v9";
@@ -190,6 +201,25 @@ &uart2 {
 	status = "okay";
 };
 
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
Please add a pinctrl here to mux GPIO1_IO13 as over current pin.
But I confirm the port is working.
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
The Host port doesn't work for me. This is because of the missing reset
signal. Maybe it's time to revive the gpio-reset driver [1]?

Anyway, here is how to fix the USB Host ports:
# gpioset 0 14=1

I guess it'd be best to have a proper reset solution before merging the
host port addition.

Regards,
Gary

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/1374834384-8071-1-git-send-email-p.zabel@pengutronix.de/

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help