Re: [PATCH v2 11/14] dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge binding
From: Rob Herring <robh@kernel.org>
Date: 2021-01-25 21:30:04
Also in:
dri-devel, linux-devicetree, linux-media, lkml
On Thu, Jan 14, 2021 at 05:22:09PM +0800, Liu Ying wrote:
quoted hunk ↗ jump to hunk
This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v1->v2: * Use graph schema. (Laurent) * Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent) .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 176 +++++++++++++++++++++ 1 file changed, 176 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yamldiff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml new file mode 100644 index 00000000..514ac90 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml@@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp LVDS Display Bridge + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. + + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color + format and can map the input to VESA or JEIDA standards. The two channels + cannot be used simultaneously, that is to say, the user should pick one of + them to use. Two LDB channels from two LDB instances can work together in + LDB split mode to support a dual link LVDS display. The channel indexes + have to be different. Channel0 outputs odd pixels and channel1 outputs + even pixels. + + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel + input color format. The two channels can be used simultaneously, either + in dual mode or split mode. In dual mode, the two channels output identical + data. In split mode, channel0 outputs odd pixels and channel1 outputs even + pixels. + + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming + consistency, this binding calls it LDB. + +properties: + compatible: + enum: + - fsl,imx8qm-ldb + - fsl,imx8qxp-ldb + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + items: + - description: pixel clock + - description: bypass clock + + clock-names: + items: + - const: pixel + - const: bypass + + power-domains: + maxItems: 1 + + fsl,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to Control and Status Registers(CSR) module.
Again, seems like this binding should be a child of the syscon.
+
+ fsl,companion-ldb:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+ "^channel@[0-1]$":
+ type: object
+ description: Represents a channel of LDB.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ description: The channel index.
+ enum: [ 0, 1 ]
+
+ phys:
+ description: A phandle to the phy module representing the LVDS PHY.
+ maxItems: 1
+
+ phy-names:
+ const: lvds_phy
+
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port of the channel.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output port of the channel.
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+ - phys
+ - phy-names
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - clocks
+ - clock-names
+ - power-domains
+ - fsl,syscon
+ - channel@0
+ - channel@1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qm-ldb
+ then:
+ properties:
+ fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8qxp-ldb";
+ clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+ <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+ clock-names = "pixel", "bypass";
+ power-domains = <&pd IMX_SC_R_LVDS_0>;
+ fsl,syscon = <&mipi_lvds_0_csr>;
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+ };
+ };
+ };
+
+ channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+ };
+ };
+ };
+ };
--
2.7.4_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel