[Patch v2 2/3] arm64: dtsi: ls1028a: Update flexcan properties
From: Kuldeep Singh <hidden>
Date: 2021-01-21 12:22:27
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
LS1028A supports two flexcan controllers similar to LX2160A. There's already a compatible entry defined i.e "fsl,lx2160ar1-flexcan" which can be further reused for LS1028A. Please note, "fsl,ls1028ar1-flexcan" compatible entry doesn't exists and can be safely removed. LS1028A has a single peripheral clock (i.e platform clock) source connected to both "ipg" and "per" and therefore, remove "sysclk" as clock source from device-tree. Signed-off-by: Kuldeep Singh <redacted> --- Hi Shawn, I would like to mention the motivation behind compatible string change. There's no ls1028a compatible entry i.e " fsl,ls1028ar1-flexcan" in flexcan driver. See below. https://elixir.bootlin.com/linux/latest/source/drivers/net/can/flexcan.c#L1913 And the documentation says that ls1028a entry should be followed by lx2160a. https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml#L42 Since ls1028a entry is not present, anyway lx2160a entry will be eventually used. Please let me know your views. arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index e00acad..d28bd52 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi@@ -408,21 +408,25 @@ }; can0: can@2180000 { - compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + compatible = "fsl,lx2160ar1-flexcan"; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(2)>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg", "per"; status = "disabled"; }; can1: can@2190000 { - compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + compatible = "fsl,lx2160ar1-flexcan"; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(2)>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg", "per"; status = "disabled"; };
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel