Re: [PATCH 1/2] dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manger
From: Tom Rix <trix@redhat.com>
Date: 2021-01-15 18:09:23
Also in:
linux-devicetree, linux-fpga, lkml
On 1/14/21 5:34 PM, Nava kishore Manne wrote:
This patch Adds compatible value for Xilinx Dynamic Function eXchnage(DFX) AXI Shutdown manager IP.
A multi patch set should have a cover letter. Use git format-patch --cover-letter
quoted hunk ↗ jump to hunk
Signed-off-by: Nava kishore Manne <redacted> --- .../bindings/fpga/xilinx-pr-decoupler.txt | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt index 4284d293fa61..42fca058a5f4 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt@@ -7,13 +7,26 @@ changes from passing through the bridge. The controller can also couple / enable the bridges which allows traffic to pass through the bridge normally.
Below is some wordsmithing to make the compatibility explicit and remove unneeded words
+Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager +Softcore
is compatible with the Xilinx LogiCORE pr-decoupler.
+ +The Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager +manages one or more shutdown managers / fpga bridges. +The controller can shutdown/passthrough the bridges which prevents
Delete 4 lines above. The DFX AXI shutdown manager prevents
+AXI traffic from passing through the bridge. The controller safely +handles AXI4MM and AXI4-Lite interfaces on a Reconfigurable Partition +when it is undergoing dynamic reconfiguration (DFX), preventing system
I don't know about the use of '(DFX)' here, above it is Dynamic Function eXchange' Here it is dynamic reconfiguration, maybe just delete the '(DFX)'
+deadlock that can occur if AXI transactions are interrupted by DFX + The Driver supports only MMIO handling. A PR region can have multiple -PR Decouplers which can be handled independently or chained via decouple/ -decouple_status signals. +PR Decouplers/AXI shutdown manager which can be handled independently +or chained via decouple/ decouple_status signals.
Being compatible, i don't think it is necessary to add to / change this section.
Required properties: - compatible : Should contain "xlnx,pr-decoupler-1.00" followed by - "xlnx,pr-decoupler" + "xlnx,pr-decoupler" or + "xlnx,dfx-axi-shutdown-manager-1.00" followed by + "xlnx,dfx-axi-shutdown-manager" - regs : base address and size for decoupler module - clocks : input clock to IP - clock-names : should contain "aclk"
Adding an example similar to the existing would be helpful. Tom _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel