[PATCH v6 22/33] iommu/mediatek: Support report iova 34bit translation fault in ISR
From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-01-11 11:23:59
Also in:
linux-devicetree, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
If the iova is over 32bit, the fault status register bit is a little different. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- drivers/iommu/mtk_iommu.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 468be7ca62e4..f3666b0d7577 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -3,6 +3,7 @@ * Copyright (c) 2015-2016 MediaTek Inc. * Author: Yong Wu <yong.wu@mediatek.com> */ +#include <linux/bitfield.h> #include <linux/bug.h> #include <linux/clk.h> #include <linux/component.h>
@@ -89,6 +90,9 @@ #define F_REG_MMU1_FAULT_MASK GENMASK(13, 7) #define REG_MMU0_FAULT_VA 0x13c +#define F_MMU_INVAL_VA_31_12_MASK GENMASK(31, 12) +#define F_MMU_INVAL_VA_34_32_MASK GENMASK(11, 9) +#define F_MMU_INVAL_PA_34_32_MASK GENMASK(8, 6) #define F_MMU_FAULT_VA_WRITE_BIT BIT(1) #define F_MMU_FAULT_VA_LAYER_BIT BIT(0)
@@ -246,8 +250,9 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) { struct mtk_iommu_data *data = dev_id; struct mtk_iommu_domain *dom = data->m4u_dom; - u32 int_state, regval, fault_iova, fault_pa; unsigned int fault_larb, fault_port, sub_comm = 0; + u32 int_state, regval, va34_32, pa34_32; + u64 fault_iova, fault_pa; bool layer, write; /* Read error info from registers */
@@ -263,6 +268,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) } layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT; write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; + if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) { + va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova); + pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova); + fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK; + fault_iova |= (u64)va34_32 << 32; + fault_pa |= (u64)pa34_32 << 32; + } + fault_port = F_MMU_INT_ID_PORT_ID(regval); if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) { fault_larb = F_MMU_INT_ID_COMM_ID(regval);
@@ -276,7 +289,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) { dev_err_ratelimited( data->dev, - "fault type=0x%x iova=0x%x pa=0x%x larb=%d port=%d layer=%d %s\n", + "fault type=0x%x iova=0x%llx pa=0x%llx larb=%d port=%d layer=%d %s\n", int_state, fault_iova, fault_pa, fault_larb, fault_port, layer, write ? "write" : "read"); }
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel