[PATCH V4 3/3] phy: phy-brcm-usb: support PHY on the BCM4908
From: Rafał Miłecki <zajec5@gmail.com>
Date: 2021-01-06 20:59:37
Also in:
linux-devicetree, lkml
Subsystem:
broadcom brcmstb usb2 and usb3 phy driver, generic phy framework, the rest · Maintainers:
Justin Chen, Al Cooper, Vinod Koul, Linus Torvalds
From: Rafał Miłecki <rafal@milecki.pl> BCM4908 seems to have slightly different registers but works when programmed just like the STB one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> --- V2: Update Kconfig as well --- drivers/phy/broadcom/Kconfig | 3 ++- drivers/phy/broadcom/phy-brcm-usb.c | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index a1f1a9c90d0d..09256339bd04 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig@@ -91,10 +91,11 @@ config PHY_BRCM_SATA config PHY_BRCM_USB tristate "Broadcom STB USB PHY driver" - depends on ARCH_BRCMSTB || COMPILE_TEST + depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST depends on OF select GENERIC_PHY select SOC_BRCMSTB + default ARCH_BCM4908 default ARCH_BRCMSTB help Enable this to support the Broadcom STB USB PHY.
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 99fbc7e4138b..63f922a5f29b 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c@@ -285,6 +285,10 @@ static const struct match_chip_info chip_info_7445 = { }; static const struct of_device_id brcm_usb_dt_ids[] = { + { + .compatible = "brcm,bcm4908-usb-phy", + .data = &chip_info_7445, + }, { .compatible = "brcm,bcm7216-usb-phy", .data = &chip_info_7216,
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel