[PATCH v4 6/6] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe
From: Kishon Vijay Abraham I <hidden>
Date: 2021-01-05 15:16:51
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
x2 lane PCIe slot in the common processor board is enabled and connected to j7200 SOM. Add PCIe DT node in common processor board to reflect the same. Signed-off-by: Kishon Vijay Abraham I <redacted> --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index def98f563336..4a7182abccf5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts@@ -6,6 +6,7 @@ /dts-v1/; #include "k3-j7200-som-p0.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/mux/ti-serdes.h> #include <dt-bindings/phy/phy.h>
@@ -241,3 +242,17 @@ resets = <&serdes_wiz0 3>; }; }; + +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie1_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel