[PATCH v2 6/6] regulator: dt-bindings: Document max8997-pmic nodes
From: Timon Baetz <hidden>
Date: 2020-12-21 09:54:52
Also in:
linux-devicetree, linux-pm, linux-samsung-soc, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Add maxim,max8997-battery and maxim,max8997-muic optional nodes. Signed-off-by: Timon Baetz <redacted> --- .../bindings/regulator/max8997-regulator.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 6fe825b8ac1b..f969fc09fe29 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt@@ -53,6 +53,17 @@ Additional properties required if either of the optional properties are used: - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used for dvs. The format of the gpio specifier depends in the gpio controller. +Optional nodes: +- charger: Node for configuring the charger driver. + Required properties: + - compatible: "maxim,max8997-battery" + - extcon: extcon specifier for charging events + - charger-supply: regulator node for charging current + +- muic: Node used only by extcon consumers. + Required properties: + - compatible: "maxim,max8997-muic" + Regulators: The regulators of max8997 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this sub-node should be of the format as listed below.
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel