[PATCH v6 13/19] dt-bindings: usb: dwc3: Add Tx De-emphasis constraints
From: Serge Semin <hidden>
Date: 2020-12-10 09:12:31
Also in:
linux-devicetree, linux-mips, linux-usb, linuxppc-dev, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
In accordance with the driver comments the PIPE3 de-emphasis can be tuned to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis property constraints so the DT schema would make sure the controller DT node is equipped with correct value. Signed-off-by: Serge Semin <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- Changelog v2: - Grammar fix: "s/tunned/tuned" - Grammar fix: remove redundant "or" conjunction. --- Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 6253bc5fb18e..e01a9a93d74a 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml@@ -156,6 +156,10 @@ properties: The value driven to the PHY is controlled by the LTSSM during USB3 Compliance mode. $ref: /schemas/types.yaml#/definitions/uint8 + enum: + - 0 # -6dB de-emphasis + - 1 # -3.5dB de-emphasis + - 2 # No de-emphasis snps,dis_u3_susphy_quirk: description: When set core will disable USB3 suspend phy
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel