From: Ying Liu <victor.liu@nxp.com>
Sent: Wednesday, November 18, 2020 4:31 PM

This patch set adds some clocks support for i.MX8qxp DC0/MIPI-LVDS
subsystems, which includes some SCU controlled clocks and some LPCG clocks.

With this patch set, some basic clocks for i.MX8qxp LVDS displays can be got by
drivers.

This patch set follows the legacy/deprecated way to add the clocks support in
clock drivers instead of the new 'two cells' dt-binding way.  The reason behind
this is that the existing i.MX8qxp SoC device tree is using the legacy way(no
conversion effort is seen) and there is not i.MX8qm(with a similar
architecture) SoC device tree for us to enable display yet.

Hi Ying,

Please don't do this.
You know the legacy clock binding will be removed and not used anymore.

Regards
Aisheng

Liu Ying (5):
  clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks
  clk: imx: clk-imx8qxp-lpcg: Add display controller LPCG clocks support
  clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS
    subsystems
  dt-bindings: clock: imx8qxp-lpcg: Add compatibles for MIPI-LVDS
    subsystems
  clk: imx: clk-imx8qxp-lpcg: Add some LPCG clocks support for MIPI-LVDS
    subsystems

 .../devicetree/bindings/clock/imx8qxp-lpcg.yaml    |  2 +
 drivers/clk/imx/clk-imx8qxp-lpcg.c                 | 79
++++++++++++++++++++++
 drivers/clk/imx/clk-imx8qxp-lpcg.h                 | 29 ++++++++
 drivers/clk/imx/clk-imx8qxp.c                      | 12 ++++
 include/dt-bindings/clock/imx8-clock.h             | 61
+++++++++++++++++
 5 files changed, 183 insertions(+)

--
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel