[PATCH] pinctrl: fix low level output voltage issue
From: Zhiyong Tao <hidden>
Date: 2020-11-20 09:31:28
Also in:
linux-devicetree, linux-gpio, linux-mediatek, lkml
Subsystem:
pin control subsystem, pin controller - mediatek, the rest · Maintainers:
Linus Walleij, Sean Wang, Linus Torvalds
This patch is used to fix low level output voltage issue. A pin is changed from input pull-up to output high. The Dout value of the pin is default as 0. If we change the direction of the pin before the dout value of the pin, It maybe produce a low level output voltage between "input pull-up" and "output high". Signed-off-by: Zhiyong Tao <redacted> --- drivers/pinctrl/mediatek/pinctrl-paris.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 623af4410b07..039ce9be19c5 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c@@ -247,13 +247,13 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg); break; case PIN_CONFIG_OUTPUT: - err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, - MTK_OUTPUT); + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, + arg); if (err) goto err; - err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, - arg); + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, + MTK_OUTPUT); break; case PIN_CONFIG_INPUT_SCHMITT: case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel