[PATCH 0/2] arm64: dts: ti: k3-j7200-som/cpb: Correct i2c bus representations

Hi,

The main_i2c0 missed the ioexpander present on the SOM itself to control muxes
to route signals to CPB connectors.

The main_i2c1 of J7200 is _not_ connected to the i2c1 of CPB, it is connected to
i2c3, so the devices on the CPB's i2c1 bus are not avalible, but the ones on the
CPB i2c3 are available under the main_i2c1.

Add nice line names at the same time to these.

Regards,
Peter
---
Peter Ujfalusi (2):
  arm64: dts: ti: k3-j7200-som-p0: main_i2c0 have an ioexpander on the
    SOM
  arm64: dts: ti: k3-j7200-common-proc-board: Correct the name of io
    expander on main_i2c1

 .../dts/ti/k3-j7200-common-proc-board.dts     | 16 +++---------
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   | 26 +++++++++++++++++++
 2 files changed, 30 insertions(+), 12 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel