Re: [PATCH 05/10] ARM: dts: BCM5301X: Provide defaults ports container node
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2020-11-10 22:13:31
Also in:
linux-devicetree, lkml, netdev
On Mon, Nov 09, 2020 at 07:31:08PM -0800, Florian Fainelli wrote:
quoted hunk ↗ jump to hunk
Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++ 1 file changed, 4 insertions(+)diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 807580dd89f5..89993a8a6765 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi@@ -489,6 +489,10 @@ srab: ethernet-switch@18007000 { status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + };
This look a bit 'lone wolf' here. Not sure how much time you intend to spend on this, but FWIW, others prefer to declare all ports in the SoC DTSI with status = "disabled", and just enable the ones used per-board, and add labels and PHY handles also per-board. Example: fsl-ls1028a.dtsi and fsl-ls1028a-rdb.dts.
};
rng: rng@18004000 {
--
2.25.1_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel