Re: PCI trouble on mvebu (Turris Omnia)
From: Toke Høiland-Jørgensen <hidden>
Date: 2020-10-27 20:21:12
Also in:
linux-pci
Toke Høiland-Jørgensen [off-list ref] writes:
quoted
Note: related issues - workaround compile ath and cfg80211 as modules (1) https://bugzilla.kernel.org/show_bug.cgi?id=209863 (2) https://bugzilla.kernel.org/show_bug.cgi?id=209855 (3) https://bugzilla.kernel.org/show_bug.cgi?id=209853Yeah, I had noticed the regdb failure but put off debugging that until the PCI issue was resolved. So guess that's next on my list - thanks for the pointer (although I'd rather avoid the module approach as booting the kernel directly from my build box over tftp is quite convenient... Let's see if there isn't another way to fix this)
To follow up on this, everything seems to work just fine (ath10k init at boot + regulatory db load) if I simply set: CONFIG_EXTRA_FIRMWARE="ath10k/QCA988X/hw2.0/board.bin ath10k/QCA988X/hw2.0/firmware-5.bin regulatory.db regulatory.db.p7s" -Toke _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel