[PATCH] gpio: aspeed: fix ast2600 bank properties
From: Billy Tsai <hidden>
Date: 2020-10-19 04:50:38
Also in:
linux-aspeed, linux-gpio
Subsystem:
gpio subsystem, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Linus Torvalds
GPIO_T is mapped to the most significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_T is input only. All the other bits need to be 1 because GPIO_Q/R/S support both input and output modes. Signed-off-by: Billy Tsai <redacted> --- drivers/gpio/gpio-aspeed.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index d07bf2c3f136..f24754b3f6d1 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c@@ -1114,6 +1114,7 @@ static const struct aspeed_gpio_config ast2500_config = static const struct aspeed_bank_props ast2600_bank_props[] = { /* input output */ + {4, 0xffffffff, 0x00ffffff}, /* Q/R/S/T */ {5, 0xffffffff, 0xffffff00}, /* U/V/W/X */ {6, 0x0000ffff, 0x0000ffff}, /* Y/Z */ { },
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel