Re: [PATCH v4 1/4] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-10-03 10:57:23
Also in:
linux-devicetree, linux-usb
On Fri, 2 Oct 2020 at 18:35, Li Jun [off-list ref] wrote:
quoted hunk ↗ jump to hunk
NXP imx8mp integrates 2 dwc3 3.30b IP and add some wakeup logic to support low power mode, the glue layer is for this wakeup functionality, which has a separated interrupt, can support wakeup from U3 and connect events for host, and vbus wakeup for device. Signed-off-by: Li Jun <redacted> --- .../devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 106 +++++++++++++++++++++ 1 file changed, 106 insertions(+)diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml new file mode 100644 index 0000000..c16c94c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml@@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8MP Soc USB Controller + +maintainers: + - Li Jun <jun.li@nxp.com> + +properties: + compatible: + items: + - const: fsl,imx8mp-dwc3
The same comment as for v3. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel