Re: [PATCH 08/12] ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: 2020-10-26 21:48:12
Also in:
linux-devicetree, linux-samsung-soc, lkml
Hi Krzysztof, On 26.10.2020 19:15, Krzysztof Kozlowski wrote:
quoted hunk ↗ jump to hunk
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 ++-- arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 ++-- arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 +- arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +- arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 2 +- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 4 ++-- arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 ++++---- arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++-- 8 files changed, 15 insertions(+), 15 deletions(-)diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index dd7f8385d81e..bf457d0c02eb 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts@@ -39,7 +39,7 @@ oscclk { }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; wakeup {@@ -344,7 +344,7 @@ &hdmi { &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>;diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 2bcbdf8a39bf..d54392fe6260 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts@@ -138,7 +138,7 @@ panel_in: endpoint { }; }; - mmc1_pwrseq: mmc1_pwrseq { + mmc1_pwrseq: mmc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ clocks = <&max77802 MAX77802_CLK_32K_CP>;@@ -205,7 +205,7 @@ &hsi2c_4 { status = "okay"; clock-frequency = <400000>; - max77802: max77802-pmic@9 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>;diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4e49d8095b29..d506da9fa661 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts@@ -129,7 +129,7 @@ &hdmi { &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>;diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index b1cf9414ce17..25fb6331c75e 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi@@ -503,7 +503,7 @@ &dmc { &hsi2c_4 { status = "okay"; - s2mps11_pmic@66 { + pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; samsung,s2mps11-acokb-ground;diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index b5ec4f47eb3a..f5f9c077df74 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi@@ -40,7 +40,7 @@ codec { &hsi2c_5 { status = "okay"; - max98090: max98090@10 { + max98090: codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx3>;diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 5da2d81e3be2..e35af40a55cb 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi@@ -13,12 +13,12 @@ #include "exynos5422-odroid-core.dtsi" / { - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&power_key>; - power_key { + power-key { /* * The power button (SW2) is connected to the PWRON * pin (active high) of the S2MPS11 PMIC, which actsdiff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index d0f6ac5fa79d..5ff493ecb6ff 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts@@ -21,28 +21,28 @@ &i2c_0 { status = "okay"; /* A15 cluster: VDD_ARM */ - ina231@40 { + sensor@40 {
power-sensor?
quoted hunk ↗ jump to hunk
compatible = "ti,ina231"; reg = <0x40>; shunt-resistor = <10000>; }; /* memory: VDD_MEM */ - ina231@41 { + sensor@41 { compatible = "ti,ina231"; reg = <0x41>; shunt-resistor = <10000>; }; /* GPU: VDD_G3D */ - ina231@44 { + sensor@44 { compatible = "ti,ina231"; reg = <0x44>; shunt-resistor = <10000>; }; /* A7 cluster: VDD_KFC */ - ina231@45 { + sensor@45 { compatible = "ti,ina231"; reg = <0x45>; shunt-resistor = <10000>;diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 60ab0effe474..0ce3443d39a8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts@@ -138,7 +138,7 @@ panel_in: endpoint { }; }; - mmc1_pwrseq: mmc1_pwrseq { + mmc1_pwrseq: mmc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ clocks = <&max77802 MAX77802_CLK_32K_CP>;@@ -214,7 +214,7 @@ &hsi2c_4 { status = "okay"; clock-frequency = <400000>; - max77802: max77802-pmic@9 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>;
Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel