[PATCH] thermal: sun8i: Use bitmap API instead of open code
From: Frank Lee <hidden>
Date: 2020-10-19 11:58:52
Also in:
linux-pm, lkml
Subsystem:
allwinner thermal driver, the rest, thermal · Maintainers:
Vasily Khoruzhick, Yangtao Li, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
From: Yangtao Li <redacted> Thw bitmap_* API is the standard way to access data in the bitfield. Signed-off-by: Yangtao Li <redacted> --- drivers/thermal/sun8i_thermal.c | 35 +++++++++++++++++---------------- 1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f8b13071a6f4..f2e4a4f18101 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c@@ -8,6 +8,7 @@ * Based on the work of Josef Gajdusek <atx@atx.name> */ +#include <linux/bitmap.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/interrupt.h>
@@ -74,7 +75,7 @@ struct ths_thermal_chip { int (*calibrate)(struct ths_device *tmdev, u16 *caldata, int callen); int (*init)(struct ths_device *tmdev); - int (*irq_ack)(struct ths_device *tmdev); + void (*irq_ack)(struct ths_device *tmdev); int (*calc_temp)(struct ths_device *tmdev, int id, int reg); };
@@ -82,6 +83,7 @@ struct ths_thermal_chip { struct ths_device { const struct ths_thermal_chip *chip; struct device *dev; + DECLARE_BITMAP(irq_bitmap, MAX_SENSOR_NUM); struct regmap *regmap; struct reset_control *reset; struct clk *bus_clk;
@@ -146,9 +148,11 @@ static const struct regmap_config config = { .max_register = 0xfc, }; -static int sun8i_h3_irq_ack(struct ths_device *tmdev) +static void sun8i_h3_irq_ack(struct ths_device *tmdev) { - int i, state, ret = 0; + int i, state; + + bitmap_zero(tmdev->irq_bitmap, tmdev->chip->sensor_num); regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
@@ -156,16 +160,16 @@ static int sun8i_h3_irq_ack(struct ths_device *tmdev) if (state & SUN8I_THS_DATA_IRQ_STS(i)) { regmap_write(tmdev->regmap, SUN8I_THS_IS, SUN8I_THS_DATA_IRQ_STS(i)); - ret |= BIT(i); + bitmap_set(tmdev->irq_bitmap, i, 1); } } - - return ret; } -static int sun50i_h6_irq_ack(struct ths_device *tmdev) +static void sun50i_h6_irq_ack(struct ths_device *tmdev) { - int i, state, ret = 0; + int i, state; + + bitmap_zero(tmdev->irq_bitmap, tmdev->chip->sensor_num); regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
@@ -173,24 +177,21 @@ static int sun50i_h6_irq_ack(struct ths_device *tmdev) if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) { regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS, SUN50I_H6_THS_DATA_IRQ_STS(i)); - ret |= BIT(i); + bitmap_set(tmdev->irq_bitmap, i, 1); } } - - return ret; } static irqreturn_t sun8i_irq_thread(int irq, void *data) { struct ths_device *tmdev = data; - int i, state; + int i; - state = tmdev->chip->irq_ack(tmdev); + tmdev->chip->irq_ack(tmdev); - for (i = 0; i < tmdev->chip->sensor_num; i++) { - if (state & BIT(i)) - thermal_zone_device_update(tmdev->sensor[i].tzd, - THERMAL_EVENT_UNSPECIFIED); + for_each_set_bit(i, tmdev->irq_bitmap, tmdev->chip->sensor_num) { + thermal_zone_device_update(tmdev->sensor[i].tzd, + THERMAL_EVENT_UNSPECIFIED); } return IRQ_HANDLED;
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel