On 10/13/20 1:58 PM, William Breathitt Gray wrote:

On Mon, Oct 12, 2020 at 12:04:10PM -0500, David Lechner wrote:

quoted

On 10/8/20 7:28 AM, William Breathitt Gray wrote:

quoted

On Thu, Oct 08, 2020 at 10:09:09AM +0200, Pavel Machek wrote:

quoted

Hi!

quoted

+        int main(void)
+        {
+                struct pollfd pfd = { .events = POLLIN };
+                struct counter_event event_data[2];
+
+                pfd.fd = open("/dev/counter0", O_RDWR);
+
+                ioctl(pfd.fd, COUNTER_SET_WATCH_IOCTL, watches);
+                ioctl(pfd.fd, COUNTER_SET_WATCH_IOCTL, watches + 1);
+                ioctl(pfd.fd, COUNTER_LOAD_WATCHES_IOCTL);
+
+                for (;;) {
+                        poll(&pfd, 1, -1);

Why do poll, when you are doing blocking read?

quoted

+                        read(pfd.fd, event_data,  sizeof(event_data));

Does your new chrdev always guarantee returning complete buffer?

If so, should it behave like that?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

I suppose you're right: a poll() should be redundant now with this
version of the character device implementation because buffers will
always return complete; so a blocking read() should achieve the same
behavior that a poll() with read() would.

I'll give some more time for additional feedback to come in for this
version of the patchset, and then likely remove support for poll() in
the v6 submission.

William Breathitt Gray

I hope that you mean that you will just remove it from the example
and not from the chardev. Otherwise it won't be possible to
integrate this with an event loop.

Would you elaborate a bit further on this? My thought process is that
because users must set the Counter Events they want to watch, and only
those Counter Events show up in the character device node, a blocking
read() would effectively behave the same as poll() with read(); if none
of the Counter Events occur, the read() just blocks until one does, thus
making the use of a poll() call redundant.

William Breathitt Gray

If the counter device was the only file descriptor being read, then yes
it wouldn't matter. But if we are using this in combination with other
file descriptors, then it is common to poll all of the file descriptors
using a single syscall to see which one is ready to read rather than
doing a non-blocking read on all of the file descriptors, which would
result in many unnecessary syscalls.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel