[PATCH v2 2/3] ARM: dts: rockchip: veyron: Remove 0 point from brightness-levels
flat view
STALE2190d
SUPERSEDED
From: Alexandru Stan <hidden>
Date: 2020-10-13 08:01:39
Also in:
linux-devicetree, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
After the "PWM backlight interpolation adjustments" patches, the backlight interpolation works a little differently. The way these dts files were working before was relying on a bug (IMHO). Remove the 0-3 range since otherwise we would have a 252 long interpolation that would slowly go between 0 and 3, looking really bad in userspace. We don't need the 0% point, userspace seems to handle this just fine because it uses the bl_power property to turn off the display. Signed-off-by: Alexandru Stan <redacted> --- arch/arm/boot/dts/rk3288-veyron-jaq.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-tiger.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index af77ab20586d..4a148cf1defc 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts@@ -20,7 +20,7 @@ / { &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = <0 8 255>; + brightness-levels = <8 255>; num-interpolated-steps = <247>; };
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index f8b69e0a16a0..82fc6fba9999 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts@@ -39,7 +39,7 @@ volum_up { &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; };
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
index 069f0c2c1fdf..52a84cbe7a90 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts@@ -23,7 +23,7 @@ / { &backlight { /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; };
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel