[PATCH 4/5] ARM: mstar: Add gpio controller to MStar base dtsi
From: Daniel Palmer <hidden>
Date: 2020-10-11 02:49:00
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The GPIO controller is at the same address in all of the currently known chips so create a node for it in the base dtsi. Some extra properties are needed to actually use it so disable it by default. Signed-off-by: Daniel Palmer <redacted> --- arch/arm/boot/dts/mstar-v7.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index f07880561e11..669aada6f286 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi@@ -109,6 +109,13 @@ l3bridge: l3bridge@204400 { reg = <0x204400 0x200>; }; + gpio: gpio@207800 { + #gpio-cells = <2>; + reg = <0x207800 0x200>; + gpio-controller; + status = "disabled"; + }; + pm_uart: uart@221000 { compatible = "ns16550a"; reg = <0x221000 0x100>;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel