[PATCH 15/18] dt-bindings: usb: meson-g12a-usb: Discard FL-adj property
STALE2182d
LANDED
From: Serge Semin <hidden>
Date: 2020-10-10 23:08:03
Also in:
linux-amlogic, linux-devicetree, linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Revision v1 of 6 in this series; landed in mainline as 7386a559caa6 on 2021-01-04.
Revisions (6)
An empty snps,quirk-frame-length-adjustment won't cause any change performed by the driver. Moreover the DT schema validation will fail, since it expects the property being assigned with some value. So just discard the property declaration then from the example. Signed-off-by: Serge Semin <redacted> --- Note the same problem is in the DT source file arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi . --- .../devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml | 1 - 1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..88184d7e26cc 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml@@ -209,6 +209,5 @@ examples: interrupts = <30>; dr_mode = "host"; snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; }; };
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel