On Wed, Oct 7, 2020 at 3:09 PM Marco Elver [off-list ref] wrote:
On Fri, 2 Oct 2020 at 07:45, Jann Horn [off-list ref] wrote:
quoted
On Tue, Sep 29, 2020 at 3:38 PM Marco Elver [off-list ref] wrote:
quoted
Add architecture specific implementation details for KFENCE and enable
KFENCE for the x86 architecture. In particular, this implements the
required interface in <asm/kfence.h> for setting up the pool and
providing helper functions for protecting and unprotecting pages.
For x86, we need to ensure that the pool uses 4K pages, which is done
using the set_memory_4k() helper function.
[...]
quoted
diff --git a/arch/x86/include/asm/kfence.h b/arch/x86/include/asm/kfence.h
[...]
quoted
+/* Protect the given page and flush TLBs. */
+static inline bool kfence_protect_page(unsigned long addr, bool protect)
+{
+ unsigned int level;
+ pte_t *pte = lookup_address(addr, &level);
+
+ if (!pte || level != PG_LEVEL_4K)
Do we actually expect this to happen, or is this just a "robustness"
check? If we don't expect this to happen, there should be a WARN_ON()
around the condition.
It's not obvious here, but we already have this covered with a WARN:
the core.c code has a KFENCE_WARN_ON, which disables KFENCE on a
warning.
So for this specific branch: Can it ever happen? If not, please either
remove it or add WARN_ON(). That serves two functions: It ensures that
if something unexpected happens, we see a warning, and it hints to
people reading the code "this isn't actually expected to happen, you
don't have to wrack your brain trying to figure out for which scenario
this branch is intended".
quoted
quoted
+ return false;
+
+ if (protect)
+ set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+ else
+ set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
Hmm... do we have this helper (instead of using the existing helpers
for modifying memory permissions) to work around the allocation out of
the data section?
I just played around with using the set_memory.c functions, to remind
myself why this didn't work. I experimented with using
set_memory_{np,p}() functions; set_memory_p() isn't implemented, but
is easily added (which I did for below experiment). However, this
didn't quite work:
[...]
For one, smp_call_function_many_cond() doesn't want to be called with
interrupts disabled, and we may very well get a KFENCE allocation or
page fault with interrupts disabled / within interrupts.
Therefore, to be safe, we should avoid IPIs.
set_direct_map_invalid_noflush() does that, too, I think? And that's
already implemented for both arm64 and x86.
It follows that setting
the page attribute is best-effort, and we can tolerate some
inaccuracy. Lazy fault handling should take care of faults after we
set the page as PRESENT.
[...]
quoted
Shouldn't kfence_handle_page_fault() happen after prefetch handling,
at least? Maybe directly above the "oops" label?
Good question. AFAIK it doesn't matter, as is_kfence_address() should
never apply for any of those that follow, right? In any case, it
shouldn't hurt to move it down.
is_prefetch() ignores any #PF not caused by instruction fetch if it
comes from kernel mode and the faulting instruction is one of the
PREFETCH* instructions. (Which is not supposed to happen - the
processor should just be ignoring the fault for PREFETCH instead of
generating an exception AFAIK. But the comments say that this is about
CPU bugs and stuff.) While this is probably not a big deal anymore
partly because the kernel doesn't use software prefetching in many
places anymore, it seems to me like, in principle, this could also
cause page faults that should be ignored in KFENCE regions if someone
tries to do PREFETCH on an out-of-bounds array element or a dangling
pointer or something.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel