[PATCH v7 05/12] ARM: dts: at91: Fix schema warnings for pwm-leds
From: Alexander Dahl <hidden>
Date: 2020-10-05 20:37:03
Also in:
linux-amlogic, linux-devicetree, linux-leds, linux-mips, linux-omap, linux-samsung-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/at91-kizbox2-2.dt.yaml
CHECK arch/arm/boot/dts/at91-kizbox2-2.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/at91-kizbox2-2.dt.yaml: pwm_leds: 'blue', 'green', 'red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/at91-kizbox3-hs.dt.yaml
CHECK arch/arm/boot/dts/at91-kizbox3-hs.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/at91-kizbox3-hs.dt.yaml: pwm_leds: 'blue', 'green', 'red', 'white' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
(Warnings above are for armv7 only, armv5 would produce similar warnings.)
Signed-off-by: Alexander Dahl <redacted>
---
Notes:
v6 -> v7:
* split up patch (one per sub arch)
* added actual warnings to commit message
arch/arm/boot/dts/at91-kizbox.dts | 10 +++++-----
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 8 ++++----
arch/arm/boot/dts/at91-kizbox3-hs.dts | 16 ++++++++--------
arch/arm/boot/dts/at91-kizbox3_common.dtsi | 10 +++++-----
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 8 ++++----
arch/arm/boot/dts/at91sam9m10g45ek.dts | 10 +++++-----
arch/arm/boot/dts/at91sam9rlek.dts | 10 +++++-----
7 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 7d938ccf71b0..6ea5e60d881d 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts@@ -48,31 +48,31 @@ }; }; - pwm_leds { + led-controller { compatible = "pwm-leds"; - network_green { + led-1 { label = "pwm:green:network"; pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - network_red { + led-2 { label = "pwm:red:network"; pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - user_green { + led-3 { label = "pwm:green:user"; pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - user_red { + led-4 { label = "pwm:red:user"; pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; max-brightness = <255>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index af38253a6e7a..8dc880c6b9d0 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi@@ -58,24 +58,24 @@ }; }; - pwm_leds { + led-controller { compatible = "pwm-leds"; - blue { + led-1 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; linux,default-trigger = "none"; }; - green { + led-2 { label = "pwm:green:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - red { + led-3 { label = "pwm:red:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>;
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 0da1f0557eaf..2799b2a1f4d2 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts@@ -15,40 +15,40 @@ model = "Overkiz KIZBOX3-HS"; compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; - pwm_leds { + led-controller-1 { status = "okay"; - red { + led-1 { status = "okay"; }; - green { + led-2 { status = "okay"; }; - blue { + led-3 { status = "okay"; }; - white { + led-4 { status = "okay"; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_red &pinctrl_led_white>; status = "okay"; - red { + led-5 { label = "pio:red:user"; gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - white { + led-6 { label = "pio:white:user"; gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; default-state = "off";
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 7c3076e245ef..9ce513dd514b 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi@@ -62,7 +62,7 @@ regulator-always-on; }; - pwm_leds { + led-controller-1 { compatible = "pwm-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_pwm_h0
@@ -71,7 +71,7 @@ &pinctrl_pwm0_pwm_h3>; status = "disabled"; - red { + led-1 { label = "pwm:red:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>;
@@ -79,7 +79,7 @@ status = "disabled"; }; - green { + led-2 { label = "pwm:green:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>;
@@ -87,14 +87,14 @@ status = "disabled"; }; - blue { + led-3 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>; status = "disabled"; }; - white { + led-4 { label = "pwm:white:user"; pwms = <&pwm0 3 10000000 0>; max-brightness = <255>;
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index fddf267b2d17..5892f20f7b16 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi@@ -54,10 +54,10 @@ }; }; - leds: pwm_leds { + leds: led-controller-1 { compatible = "pwm-leds"; - led_blue: pwm_blue { + led_blue: led-1 { label = "pwm:blue:user"; pwms = <&pwm0 2 10000000 0>; max-brightness = <255>;
@@ -65,14 +65,14 @@ status = "disabled"; }; - led_green: pwm_green { + led_green: led-2 { label = "pwm:green:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - led_red: pwm_red { + led_red: led-3 { label = "pwm:red:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index a3a5c82d9f29..c50706b653d0 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts@@ -313,27 +313,27 @@ }; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - d8 { + led-1 { label = "d8"; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - d6 { + led-2 { label = "d6"; pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "nand-disk"; }; - d7 { + led-3 { label = "d7"; pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 0de75d3c4f18..035ce5dedff7 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts@@ -218,26 +218,26 @@ }; }; - pwmleds { + led-controller-1 { compatible = "pwm-leds"; - ds1 { + led-1 { label = "ds1"; pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; }; - ds2 { + led-2 { label = "ds2"; pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; }; }; - leds { + led-controller-2 { compatible = "gpio-leds"; - ds3 { + led-3 { label = "ds3"; gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat";
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel