Subject: [PATCH 3/6] arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line
pull-up

The PMIC's interrupt is level low and should be pulled up.  The PMIC's device
node had pinctrl-0 property but it lacked pinctrl-names which is required to
apply the pin configuration.

Fixes: 5f67317bd967 ("arm64: dts: imx8mm: correct interrupt flags")
Fixes: aa71d0648318 ("arm64: dts: imx8mm: Split the imx8mm evk board dts to
a common dtsi")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index f305a530ff6f..521eb3a5a12e 100644

--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

@@ -121,6 +121,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
--

2.17.1