Re: [PATCH v2 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings

diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
new file mode 100644
index 000000000000..502d97630ecc
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: iEi WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
+
+maintainers:
+  - Luka Kovacic <luka.kovacic@sartura.hr>
+
+description: |
+  This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
+
+  The LED module is a sub-node of the MCU node in the Device Tree.
+
+properties:
+  compatible:
+    const: iei,wt61p803-puzzle-leds
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@0$":
+    type: object

+    description: |
+      Properties for a single LED.
+
+    properties:
+      reg:
+        description:
+          Index of the LED. Only one LED is supported at the moment.
+        minimum: 0
+        maximum: 0
+
+      label: true
+
+      linux,default-trigger: true
+

+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"

diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
new file mode 100644
index 000000000000..38846c758372
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: iEi WT61P803 PUZZLE MCU from IEI Integration Corp.
+
+maintainers:
+  - Luka Kovacic <luka.kovacic@sartura.hr>
+
+description: |
+  iEi WT61P803 PUZZLE MCU is embedded in some iEi Puzzle series boards.
+  It's used for controlling system power states, fans, LEDs and temperature
+  sensors.
+
+  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
+  binding documents under the respective subsystem directories.
+
+properties:
+  compatible:
+    const: iei,wt61p803-puzzle
+
+  current-speed:
+    description:
+      Serial bus speed in bps
+    maxItems: 1