Re: [PATCH v2] iio: adc: at91-sama5d2_adc: fix DMA conversion crash
From: Jonathan Cameron <jic23@kernel.org>
Date: 2020-09-26 15:06:43
Also in:
linux-iio, lkml
On Wed, 23 Sep 2020 15:17:48 +0300 Eugen Hristev [off-list ref] wrote:
After the move of the postenable code to preenable, the DMA start was
done before the DMA init, which is not correct.
The DMA is initialized in set_watermark. Because of this, we need to call
the DMA start functions in set_watermark, after the DMA init, instead of
preenable hook, when the DMA is not properly setup yet.
Fixes: f3c034f61775 ("iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} positions")
Signed-off-by: Eugen Hristev <redacted>Applied to the fixes togreg branch of iio.git. Thanks, Jonathan
quoted hunk ↗ jump to hunk
--- Changes in v2: - check return value of buffer prepare, and in case of error, unwind DMA - validated by trying to force an error : # echo 100 > /sys/bus/iio/devices/iio\:device0/buffer/length # echo 100 > /sys/bus/iio/devices/iio\:device0/buffer/watermark # iio_generic_buffer -n fc030000.adc -t fc030000.adc-dev0-external_rising -c 5 iio device number being used is 0 iio trigger number being used is 0 /sys/bus/iio/deviciio io:device0 fc030000.adc-dev0-external_risingiio:device0: using dma0chan10 for rx DMA transfers iio iio:device0: continuing without DMA support 505.151367 983.715820 1352.709961 1485.644531 Original patch message: Hi, This crash is in the kernel since 5.8-rc1 Please have a look at discussion here: https://lore.kernel.org/linux-iio/CA+U=DsqRUtjjoe5nevP_wNxTgr27+O2V1h9w7d3QijBQ+5f3XA@mail.gmail.com/T/#t (local) Thanks ! drivers/iio/adc/at91-sama5d2_adc.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index de9583d6cddd..f94641193b98 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c@@ -884,7 +884,7 @@ static bool at91_adc_current_chan_is_touch(struct iio_dev *indio_dev) AT91_SAMA5D2_MAX_CHAN_IDX + 1); } -static int at91_adc_buffer_preenable(struct iio_dev *indio_dev) +static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) { int ret; u8 bit;@@ -901,7 +901,7 @@ static int at91_adc_buffer_preenable(struct iio_dev *indio_dev) /* we continue with the triggered buffer */ ret = at91_adc_dma_start(indio_dev); if (ret) { - dev_err(&indio_dev->dev, "buffer postenable failed\n"); + dev_err(&indio_dev->dev, "buffer prepare failed\n"); return ret; }@@ -989,7 +989,6 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) } static const struct iio_buffer_setup_ops at91_buffer_setup_ops = { - .preenable = &at91_adc_buffer_preenable, .postdisable = &at91_adc_buffer_postdisable, };@@ -1563,6 +1562,7 @@ static void at91_adc_dma_disable(struct platform_device *pdev) static int at91_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val) { struct at91_adc_state *st = iio_priv(indio_dev); + int ret; if (val > AT91_HWFIFO_MAX_SIZE) return -EINVAL;@@ -1586,7 +1586,15 @@ static int at91_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val) else if (val > 1) at91_adc_dma_init(to_platform_device(&indio_dev->dev)); - return 0; + /* + * We can start the DMA only after setting the watermark and + * having the DMA initialization completed + */ + ret = at91_adc_buffer_prepare(indio_dev); + if (ret) + at91_adc_dma_disable(to_platform_device(&indio_dev->dev)); + + return ret; } static int at91_adc_update_scan_mode(struct iio_dev *indio_dev,
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel