[PATCH v2 0/2] mainline Protonic WD3 board
flat view
STALE2188d
SUPERSEDED
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2020-09-24 04:57:24
Also in:
linux-devicetree, lkml
Subsystem:
arm and arm64 soc sub-architectures (common parts), open firmware and flattened device tree bindings, the rest · Maintainers:
Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Status: Superseded by v4 (posted 2020-11-17). [go to v4]
Revision v2 (3 revisions archived).
Revisions (3)
- v2 current
- v3 [diff against previous]
- v4 [diff against previous]
changes v2: - fix comment: WD2 -> WD3 Oleksij Rempel (2): dt-bindings: arm: fsl: add Protonic WD3 board ARM: dts: add Protonic WD3 board .../devicetree/bindings/arm/fsl.yaml | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6qp-prtwd3.dts | 553 ++++++++++++++++++ 3 files changed, 555 insertions(+) create mode 100644 arch/arm/boot/dts/imx6qp-prtwd3.dts -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel